The PARIS Forums: PARIS: Main » How do I reduce the number of EDS cards and still have my projects open?

Home » The PARIS Forums » PARIS: Main » How do I reduce the number of EDS cards and still have my projects open?

Show: Today's Messages :: Polls :: Message Navigator

How do I reduce the number of EDS cards and still have my projects open? [message #86785]

Sat, 16 June 2007 22:53

John Shapiro

Messages: 15
Registered: August 2007

Junior Member

. This
is only during your trouble shooting phase. Once you get everything ironed
out, you can put the default ppj back. I ran into this problem when I was
trouble shooting a while back.
Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Well here's what is happening.
>
>I looked very closely at the pins on the scsi cables and noticed
>a slightly bent one or two on almost half of them (5). I think it's
>from being careless about pushing them in. I straightened them
>perfectly and yet still no luck with booting Paris. "No interface =
>attached
>to the Master Card" is the message. I'm only using one mec to test.
>I also tried the 442. Once in a while the Magma wouldn't turn on with =
>the
>

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projectsopen? [message #86786 is a reply to message #86785]

Sat, 16 June 2007 23:04

JeffH

Messages: 307
Registered: October 2007
Location: Wamic, OR

Senior Member

;442 attached. I think that is because of the bent pins. That's good of
>the Magma. I've tried all five cards, removed the A card and swapped it
=
>
>with another still no luck.=20
>
>I'm lost in this quagmire now. I'm not even pissed about the busted mec
>at this point. I want an answer to what is going on. The default =
>project=20
>is looking for external word clock so that's my only choice although I
>have tried it with no Lucid attached with the same results.
>
>I think I'll call Edmund.
> "Rod Lincoln" <rlincoln@nospam.kc.r.com> wrote in message =
>news:469708c8$1@linux...
>
> That kinda totally sucks. Sorry.
> rod
> "Tom Bruhl" <arpegio@comcast.net> wrote:
> >
> >
> >Hey Rod,
> >Ya I've been swapping things out to no end just to be sure.
>

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projects open? [message #86787 is a reply to message #86786]

Sat, 16 June 2007 23:48

John Shapiro

Messages: 15
Registered: August 2007

Junior Member

>I even had trouble getting it going with internal clock which ruled
> >out the Lucid in my mind.
> >
> >The latest news is I couldn't get it to boot at all with other Mecs
> >being the master. In the process I smoked the original Mec A
> >because the SCSI cable was half in at start up. I heard a crack
> >and then the smell of burning chips. It still powers up but it's out
> >of the picture now. Loaded with modules too.
> >
> >Now nothing gets it going except maybe the lowly 442. I'll try
> >that next. I have a local engineer coming over to see what=3D20
> >Paris can do. He's very well respected in these parts.
> >To bad I'm down for the count it seems.
> >Ass
> >
> > "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =3D
> >news:4696c93b$1@linux...
> >
> > Tom, have you done anything to rule out the possibility that it may
=
>be
> =3D
> >a funky
> > MEC word clock connection, or perhaps the Lucid clock is flakey. Or
=
>=3D
> >even
> > a bad mogami wordclock cable (I know that's a longshot, but =
>anything's
> =3D
> >possible)
> > Just a thought.
> > Rod
> > "Tom Bruhl" <

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projects open? [message #86791 is a reply to message #86785]

Sat, 16 June 2007 18:36

Messages: 199
Registered: February 2006

Senior Member

lesoft.com/refer.html">http://www.polesoft.com=
>/re=3D
> >fer=3D3D
> > >.html</A> </FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY>=3D3D
> > ></HTML>
> > >
> > >
> >
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
> >charset=3D3Diso-8859-1">
> ><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D3D#ffffff>
> ><DIV><FONT face=3D3DArial size=3D3D2>Hey Rod,</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>Ya I've been swapping things out
=
>to no
> =3D
> >end just to=3D20
> >be sure.</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>I even had trouble getting it =
>going =3D
> >with internal=3D20
> >clock which ruled</FONT></DIV>
> ><DIV><FONT face=3D3DArial size=3D3D2>out th

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projects open? [message #86793 is a reply to message #86787]

Sun, 17 June 2007 07:43

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

D
> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> > <DIV>"Rod Lincoln" <<A=3D20
> > =3D
> =
>>href=3D3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A=
>>&g=3D
> >t;=3D20
> > wrote in message <A=3D20
> > =3D
> =
>>href=3D3D"news:4696c93b$1@linux">news:4696c93b$1@linux</A>...</DIV><BR>T=
>om,=3D
> > have=3D20
> > you done anything to rule out the possibility that it may be a =3D
> >funky<BR>MEC=3D20
> > word clock connection, or perhaps the Lucid clock is flakey. Or =3D
> >even<BR>a bad=3D20
> > mogami wordclock cable (I know that's a longshot, but =
>anything's=3D20
> > possible)<BR>Just a thought.<BR>Rod<BR>"Tom Bruhl" <<A=3D20
> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=3D20
> > wrote:<BR>><BR>><BR>>Deej,<BR>>Ya, I've uninstalled, =3D
> >reinstalled=3D20
> > Paris about five times total in the =3D3D<BR>>last day and a =3D
> >half.<BR>>I am=3D20
> > close to starting from scratch and possibly doing the antipace=3D20
> > =3D3D<BR>>thing.<BR>>I'm getting pretty good at it. I have =3D
> >Mec 1=3D20
> > loaded with cards attached<BR>=3D3D<BR>>to what has =3D
> >always<BR>>been Card A=3D20
> > for three years. Can that change? Paris works fine with =3D
> >just<BR>=3D3D<BR>>that=3D20
> > one. I'll try=3D3D20<BR>>all the others in that position just =3D
> >to see=3D20
> > though.<BR>><BR>>I am close to starting from scratch and =3D
> >possibly doing=3D20
> > the antipace =3D3D<BR>>thing. How could that be=3D3D20<BR>>the =3D
> >evil that=3D20
> > won't allow hardware to show =3D
> >up?<BR>>Thanks,<BR>>Tom<BR>> "DJ"=3D20
> > <animix _ at _ animas _ dot _ net> wrote in message=3D20
> > =3D3D<BR>>news:4696229c$1@linux...<BR>> Have you tested each =3D
> >MEC=3D20
> > individually? I'd start there. Did you =
>=3D3D<BR>>iuninstall/reinstall =3D
> >Paris=3D20
> > yet?<BR>> "Tom Bruhl" <<A=3D20
> > href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
>wrote =3D
> >in message=3D20
> > =3D3D<BR>>news:4695d5bf@linux...<BR>> Sorry to =3D
> >shout but=3D20
> > this is driving me insane.<BR>><BR>> I am =3D
> >working with=3D20
> > a cloned drive that used to work with<BR>> 2 Mecs =3D
> >and=3D20
> > WC. Now no matter what I do, I can not<BR>> =3D
> >get a=3D20
> > second Mec to show up and receive clock. =3D
> >It<BR>> =3D20
> > doesn't matter if it's at the end of the line or=3D20
> > anywhere<BR>> else. It doesn't matter if =3D
> >it's=3D20
> > internally clocked or externally<BR>> =3D
> >clocked. I've=3D20
> > changed Mecs, clock cables, SCSI cables<BR>> and =3D
> >no=3D20
> > changes. I've even tried a reinstall of =3D
> >Paris.<BR>> =3D20
> > Same deal. =3D3D20<BR>><BR>> I must be doing =3D
> >something=3D20
> > totally wrong for this to continue.<BR>> The only =3D
> >thing=3D20
> > else I can think to try is swapping the =3D
> >last=3D3D20<BR>> EDS=3D20
> > card with another or go down to four. Maybe=3D20
> > it's<BR>> card 5? Or, triple check the =3D
> >connectors=3D20
> > between all the cards<BR>> =3D20
> > again.<BR>><BR>> All EDS cards are up and =3D
> >running and=3D20
> > play audio with Paris effects.<BR>> All 5 cards =3D
> >share 3=3D20
> > IRQs with nothing else.<BR>> What else is=3D20
> > there?<BR>> Sadly,<BR>> =3D20
> > Tom<BR>><BR>><BR>> I choose Polesoft =3D
> >Lockspam to=3D20
> > fight spam, and you?<BR>> <A=3D20
> > =3D
> =
>>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
>fer=3D
> >.html</A> =3D20
> > <BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=3D20
> > Transitional//EN"><BR>><HTML><HEAD><BR>><META=3D20
> > http-equiv=3D3D3DContent-Type content=3D3D3D"text/html;=3D20
> > =3D3D<BR>>charset=3D3D3Diso-8859-1"><BR>><META =3D
> >content=3D3D3D"MSHTML=3D20
> > 6.00.2800.1400"=3D20
> > =3D
> >name=3D3D3DGENERATOR><BR>><STYLE></STYLE><BR>></HEA=3D
> >D><BR>><BODY=3D20
> > bgColor=3D3D3D#ffffff><BR>><DIV><FONT face=3D3D3DArial=3D20
> > =3D
> >size=3D3D3D2>Deej,</FONT></DIV><BR>><DIV><FONT=3D20
> > face=3D3D3DArial size=3D3D3D2>Ya, I've uninstalled, =
>reinstalled=3D20
> > Paris<BR>=3D3D<BR>>about five=3D3D20<BR>>times total in the last =
>day =3D
> >and a=3D20
> > half.</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>I am close to starting from scratch=3D20
> > and<BR>=3D3D<BR>>possibly=3D3D20<BR>>doing the antipace=3D20
> > thing.</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>I'm getting pretty good at it. I =3D3D<BR>>have =
>Mec=3D20
> > 1=3D3D20<BR>>loaded with cards attached to what has=3D20
> > always</FONT></DIV><BR>><DIV><FONT =3D
> >face=3D3D3DArial=3D20
> > size=3D3D3D2>been Card A for three years. Can =3D3D<BR>>that=3D20
> > change?=3D3D20<BR>>Paris works fine with just that one. I'll =
>try=3D20
> > </FONT></DIV><BR>><DIV><FONT face=3D3D3DArial=3D20
> > size=3D3D3D2>all the others

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projects open? [message #86819 is a reply to message #86785]

Sun, 17 June 2007 11:41

John Shapiro

Messages: 15
Registered: August 2007

Junior Member

e=3D3D3D3D2>and=3D20
> no changes. I've even =3D
>=3D3D<BR>>=3D3D3D<BR>>tried=3D3D20<BR>> =3D20
> a=3D3D3D20<BR>> reinstall of=3D3D20<BR>> =3D20
> Paris.</FONT></DIV><BR>>=3D20
> =3D3D<BR>><DIV><FONT=3D3D20<BR>> face=3D3D3D3DArial=3D20
> size=3D3D3D3D2>Same deal.=3D3D20<BR>> =3D20
> </FONT></DIV><BR>>=3D20
> =3D3D<BR>><DIV><FONT=3D3D20<BR>> face=3D3D3D3DArial=3D20
> size=3D3D3D3D2></FONT> =3D3D<BR>></DIV><BR>>=3D20
> =3D3D20<BR>> <DIV><FONT face=3D3D3D3DArial =3D
>size=3D3D3D3D2>I must be=3D20
> doing =3D3D<BR>>something totally=3D3D20<BR>> =3D
>=3D3D3D<BR>>wrong=3D20
> for=3D3D3D20<BR>> this to=3D3D20<BR>> =3D20
> continue.</FONT></DIV><BR>> =3D3D20<BR>> =3D20
> <DIV><FONT face=3D3D3D3DArial size=3D3D3D3D2>The only thing =3D
>else I=3D20
> =3D3D<BR>>can think=3D3D20<BR>> =3D
>to<BR>=3D3D3D<BR>>try=3D20
> is=3D3D3D20<BR>&g

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projectsopen? [message #86821 is a reply to message #86819]

Sun, 17 June 2007 12:02

JeffH

Messages: 307
Registered: October 2007
Location: Wamic, OR

Senior Member

er.html" target="_blank">http://www.polesoft.com/refer.html">http://www.po=3D=

>lesoft.com/refer=3D3D<BR>>'>http://www.polesoft.com/refer.html">ht=3D
>tp://www.polesoft.com/refer</A=3D3D<BR>>>=3D3D3D<BR>>.html&=3D
>lt;/A>=3D3D20<BR>> =3D20
> =3D
>=3D3D<BR>></FONT></DIV></BLOCKQUOTE></BLOCKQUOTE>=3D
>;</BODY&=3D3D<BR>>gt;=3D3D3D<BR>></HTML><BR>&g=3D
>t;<BR>><BR></BLOCKQUOTE></BODY></HTML=3D3D<BR=3D
>>>><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>
>

------=_NextPart_000_01C0_01C7C532.94979FF0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Rod,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>

Report message to a moderator

Re: How do I reduce the number of EDS cards and still have my projects open? [message #86846 is a reply to message #86821]

Sun, 17 June 2007 16:49

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

t;  size=3D3D3D3D2></FONT>=20
=3D3D<BR>></DIV><B R>>=3D20 <BR>> =20
=3D3D20<BR>> <DIV><FONT face=3D3D3D3DArial=20
=3D<BR>>size=3D3D3D3D2>I am=3D20<BR>>  working with a=20
=3D3D<BR>>cloned drive=3D3D20<BR>>=20
=3D<BR>>=3D3D3D<BR>>that=3D20<BR >>  used =
to=3D3D3D20<BR>>=20
work=3D3D20<BR>> =3D20<BR>> =20
with</FONT></DIV><BR& gt;>=3D20 <BR>> =20
=3D3D<BR>><DIV><FO NT=3D3D20<BR>> =
face=3D3D3D3DArial=20
=3D<BR>>size=3D3D3D3D2>2=3D20<BR>>  Mecs and WC.=20
</FONT><FONT=3D3D20<BR>&a mp;gt; =3D20<BR>> =20
=3D3D3D<BR>>face=3D3D3D3DArial=3D3D3D20 <BR>>=20
=3D<BR> >=3D3D<BR>>size=3D3D3D3D2&gt ;Now=3D20 <BR>>  =
no=20
matter=3D3D20<BR>> what I do, I can=3D20<BR>> =20
=3D3D<BR>>not</FONT>& lt;/DIV><BR>>=20
=3D<BR>>=3D3D20<BR>> =3D20<BR>>  =
<DIV><FONT=20
face=3D3D3D3DArial size=3D3D3D3D2>get a second Mec =
=3D<BR>>to=3D20<BR>> =20
=3D3D<BR>>show up and=3D3D20<BR>> =
=3D20<BR>> =20
=3D3D3D<BR>>receive=3D3D3D20<BR& amp;gt;>=20
=3D<BR>>clock.=3D3D20<BR>> =3D20<BR>> =20
It</FONT></DIV><BR&gt ;>=3D20 <BR>> =20
=3D3D<BR>><DIV><FO NT=3D3D20<BR>>=20
face=3D3D3D3DArial=3D20<BR>>  size=3D3D3D3D2>doesn't matter =
if it's at=20
the end =
=3D<BR> >=3D3D<BR>>=3D3D3D<BR& ;gt;>of=3D20 <BR>>  =

the=3D3D20<BR>> line=3D3D3D20<BR>> =
or=3D3D20<BR>>=20
=3D<BR>><BR>>  =
anywhere</FONT></DIV><BR& amp;gt;>=20
=3D3D20<BR>> =3D20<BR>>  <DIV><FONT =
face=3D3D3D3DArial=20
size=3D3D3D3D2>else. It doesn't=3D20<BR>>  =
=3D3D<BR>>matter=20
if=3D3D20<BR>>=20
=
=3D<BR> >=3D3D3D<BR>>it's=3D3D3D20&l t;BR>>=3D20 <BR>>&=
nbsp;=20
internally clocked or=3D3D20<BR>> =3D20<BR>> =20
externally</FONT></DIV><B R>> =
=3D3D20<BR>>=20
=3D20<BR>>  <DIV><FONT face=3D3D3D3DArial=20
size=3D3D3D3D2>clocked. I've =3D<BR>>changed=3D20<BR>> =20
=3D3D<BR>>Mecs,=3D3D20<BR&gt ;>=20
=3D3D3D<BR>>clock=3D20<BR>>  =
cables,=3D3D3D20<BR>>=20
SCSI=3D3D20<BR>> =3D20<BR>> =20
cables</FONT></DIV><BR&am p;gt;>=3D20 <BR>> =20
=3D3D<BR>><DIV><FO NT=3D3D20<BR>> =
face=3D3D3D3DArial=20
=3D<BR>>size=3D3D3D3D2>and=3D20<BR>>  no changes. I've =
even=20
=
=3D<BR> >=3D3D<BR>>=3D3D3D<BR& ;gt;>tried=3D3D20<BR>=
>=20
=3D20<BR>>  a=3D3D3D20<BR>> reinstall =
of=3D3D20<BR>>=20
=3D20<BR>> =20
Paris.</FONT></DIV><BR&am p;gt;>=3D20 <BR>> =20
=3D3D<BR>><DIV><FO NT=3D3D20<BR>>=20
face=3D3D3D3DArial=3D20<BR>>  size=3D3D3D3D2>Same=20
deal.=3D3D20<BR>> =3D20<BR>> =20
</FONT></DIV><BR>& amp;gt;=3D20 <BR>> =20
=3D3D<BR>><DIV><FO NT=3D3D20<BR>>=20
face=3D3D3D3DArial=3D20<BR>>  size=3D3D3D3D2></FONT>=20
=3D3D<BR>></DIV><B R>>=3D20 <BR>> =20
=3D3D20<BR>> <DIV><FONT face=3D3D3D3DArial=20
=3D<BR>>size=3D3D3D3D2>I must be=3D20<BR>>  doing=20
=3D3D<BR>>something totally=3D3D20<BR>>=20
=3D<BR>>=3D3D3D<BR>>wrong=3D20 <BR>>  =
for=3D3D3D20<BR>>=20
this to=3D3D20<BR>> =3D20<BR>> =20
continue.</FONT></DIV><BR >> =3D3D20<BR>> =

=3D20<BR>>  <DIV><FONT face=3D3D3D3DArial =
size=3D3D3D3D2>The=20
only thing =3D<BR>>else I=3D20<BR>>  =3D3D<BR>>can =

think=3D3D20<BR>>=20
=3D<BR> >to<BR>=3D3D3D<BR>&gt ;try=3D20 <BR>> =20
is=3D3D3D20<BR>> swapping the=20
=3D<BR> >=3D3D<BR>>last=3D3D2

Report message to a moderator

Previous Topic:	UPDATE: Lynx and ADAT Sync w/ Paris
Next Topic:	More ExperiMetal Wierdness for you to check out...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 18 18:38:24 PDT 2026

Total time taken to generate the page: 0.00847 seconds