| Important adat sync questions for Dave et al [message #66160] |
Wed, 05 April 2006 08:37  |
![jef knight[1] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "jef knight[1] is currently offline")
jef knight[1]
Messages: 201
Registered: October 2005
|
Senior Member |
|
|
t; is
>> > Error 1/1: Can't initialize engine. They work just fine on the older
>pc
>> > with Windows 98se. Unlike in 98se, XP doesn't show any Ensoniq EDS1000
>> > cards in Device Manager, only the Paris Midi Driver. It doesn't even
>> > recognize that a new device is installed, once the EDS cards are put
in.
>> > Other cards such as mdoem, network card, etc. are recognized. Need
>help.
>> >
>> >
>>
>>
>
>Turn on PNP OS in bios, also turn off USB, Parallel Port, Serial and anything
else you can till you get stable. Also make sure the cards come up on their
own IRQ. My MB manual was wrong on which slots share IRQs so all this time
mine was crashing due to IRQ conflicts. On boot up look at what IRQ's the
BIOS is putting them on. IRQ 3 works best for me. Then run the Schrezo
setup program to install the drivers, Install Paris and the FX subsystem
and you should be golden.
John
"cr8250" <jwires@sbcglobal.net> wrote:
>Thanks for the tips. I just don't get why Matrox is such a pain. There
>appears to be plenty of irq's and they are nice cards. Also, you mention
>the pci specs... what pci spec do the EDS 1000 cards have? I believe the
>new motherboard standard is v 2.2. Here ar
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
