| Mixing with PARIS outside the box [message #63007] |
Fri, 13 January 2006 07:40  |
Dominic
Messages: 12
Registered: March 2006
|
Junior Member |
|
|
LDC's seems to work
>> better (at least IMO) for room mics. Just wondering what you
>> went with.
>>
>> I guess I do things backwards, compared to a lot of people, with
>> regard to overheads vs. room mics - I've seen plenty of folks
>> using SDC's for overheads & LDC's for room mics - personally, I
>> like the imaging you get from LDC's as overheads, and t
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Mixing with PARIS outside the box (auxes for stem mixes) [message #63742 is a reply to message #63046] |
Wed, 25 January 2006 07:41  |
Dominic
Messages: 12
Registered: March 2006
|
Junior Member |
|
|
e voltage.
>>I am pretty sure it uses 6V for fillament so just before this 6V goes out
>>of the power supply put a 3300-4700uF/16V electrolytic with negative to
>the
>>ground.
>>Same for anode voltage, might be 120V-170V so put a 22uF/250V there.
>>Hope this helps.
>>Regards,
>>Dimitrios
>>
>>"Cujo" <chris@nospamapplemanstudio.com> wrote:
>>>
>>>
>>>Ok, I was working whit a singer last night tryin out my NOS tube,
>>>The mic was sounding nice, then I hear a faint hum.
>>>Argg, I made sure the body of the mic was tight, and all that.
>>>So today I decided to test (The client never even heard the hum)
>>>Turns out it is not the mic, but seems to be coming from my compressor
>rack.
>>>Nothing has changed although it is an old house, but I did have it grounded
>>>last summer.
>>>Oh and yeas the power is sort mickey mouse with 6 way surge protectors,
>>>I am going to do some trouble shooting, but I am thinking about a conditioner,
>>>I ahve heard they don;t do a hell of a lot though.
>>>Anyone have any ideas?
>>>
>>Having owned two Challengers myself... I'd sell my left nut for one of
those!!! :-)
David.
Aaron Allen wrote:
> Man, I'd like to see some of this hit the market.
> http://autos.msn.com/as/article.aspx?xml=winningvote&shw =autoshow2006
>
> AA
>
>Here's how it currently works around here:
http://www.utexas.edu/its/sds/microsoft/index.html
"Tony Benson" <tony@standinghampton.com> wrote:
>I'm not sure, but aren't they talking about upgrading a machine with an
OEM
>licensed version of Windows installed? It sounds like if you've purchased
a
>retail version, you can use it on any single machine, but if you buy say
a
>Dell with Windows pre installed, and then upgrade the mother board, that
the
>OEM license is no longer valid. ? Is that how you are reading it?
>
>Tony
>
>
>"Aaron Allen" <nospam@not_here.dude> wrote in message
>news:44049735$1@linux...
>> I'm not sure of that, seeing references to OEM, SA, Server and FPP in
the
>> document. If there are EDU licenses for all those things, I was not aware
>> of it?
>> I don't want to spread FUD, so if someone in EDU knows differently, by
all
>> means speak up.
>> AA
>>
>>
>> "EK Sound" <
|
|
|
|
| Re: Mixing with PARIS outside the box (auxes for stem mixes) [message #63752 is a reply to message #63742] |
Wed, 25 January 2006 09:19 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
;adkproaudio.com<BR></BL=3D
> >>
> >> >OCKQUOTE></BODY></HTML>
> >> >
> >> >
> >>
> >>
> >><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> >><HTML><HEAD>
> >><META http-equiv=3DContent-Type content=3D"text/html; =
> >>charset=3Diso-8859-1">
> >><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
> >><STYLE></STYLE>
> >></HEAD>
> >><BODY bgColor=3D#ffffff>
> >><DIV><FONT face=3DArial size=3D2>LM,</FONT></DIV>
> >><DIV><FONT face=3DArial size=3D2>Can't wait to hear.</FONT></DIV>
> >><DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
> >><BLOCKQUOTE=20
> >>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
> >>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> >> <DIV>"LaMont" <<A=20
> >> href=3D"mailto:jjdpro@ameritech.net">jjdpro@ameritech.net</A>> =
> >>wrote in=20
> >> message <A =
> >>href=3D"news:44052522@linux">news:44052522@linux</A>...</DIV><BR>HEY=20
> >> Tom,<BR>I'm in the Prcess of moving th magma card to differnt =
> >>slots..I'll let=20
> >> you<BR>know what happens..<BR><BR>"Tom Bruhl" <<A=20
> >> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
> >> wrote:<BR>><BR>><BR>>LaMont,<BR>>EDS1 with Matrox is a bad =
> >>
> >> thing. I'd try different slots within<BR>>the Magma to =
> >>correct=20
> >> that. Have you tried any other slots on<BR>>the mobo for the =
> >>Magma=20
> >> card? That might be the first thing unless<BR>>you know that =
> >>won't=20
> >> help.<BR>>Tom<BR>> "LaMont" <<A=20
> >> href=3D"mailto:jjdpro@ameritech.net">jjdpro@ameritech.net</A>> =
> >>wrote in=20
> >> message =3D<BR>>news:4404e5bf$1@linux...<BR>><BR>> Hi=20
> >> Chris,<BR>> Fresh install of win Xp/sp1. New drives, new =
> >>everything.=20
> >> I'm using =3D<BR>>Apci,<BR>> not Standard PC. Mother Board =
> >>
> >> GA-K8NSC-939<BR>> nforce-3 ultra 250gb.<BR>><BR>> =
> >>-Maybe=20
> >> moving the magma(13 slot) to a differnt slot.(It's currently=20
> >> =3D<BR>>residing<BR>> in PCI slot 4. According to the =
> >>manual, slot 4=20
> >> and 2 are not shared. =3D<BR>>Plus<BR>> even with the Sata =
> >>
> >> controllers activated, each of the (4)eds cards=20
> >> had<BR>=3D<BR>>their<BR>> own IRQ. However, 1 EDS card =
> >>shared (IRQ=20
> >> 16) with the Matrox G450. =3D<BR>>Strange..<BR>><BR>> =
> >>I've been=20
> >> looking into this PCI latency issues and download an app=20
> >> to<BR>=3D<BR>>look<BR>> and change soem of the PCI latency =
> >>
> >> settings.=3D20<BR>><BR>> The Sata controller had a setting =
> >>of=20
> >> 0(zero). EDS scherzo (32) matrox<BR>=3D<BR>>(64)..IDE<BR>> =
> >>
> >> controller (0)..<BR>><BR>> Thanks for your help=20
> >> ..LaMont<BR>><BR>><BR>><BR>> Ahris Ludwig =
> >><<A=20
> >> href=3D"mailto:chrisl@adkproaudio.com">chrisl@adkproaudio.com</A>>=20
> >> wrote:<BR>> >HI Lamont,<BR>> >Sorry t
|
|
|
|
| Re: Mixing with PARIS outside the box (auxes for stem mixes) [message #63774 is a reply to message #63752] |
Wed, 25 January 2006 13:05 |
Dominic
Messages: 12
Registered: March 2006
|
Junior Member |
|
|
BR><BR><BR> Ahris=20
>>>> Ludwig <<A=3D20<BR>> href=3D3D"<A=20
>>>> =
>>> href=3D'mailto:chrisl@adkproaudio.com">chrisl@adkproaudio.com</A>>=3D20'>=
>>>> mailto:chrisl@adkproaudio.com">chrisl@adkproaudio.com</A>>=3D=
>>>> 20</A><BR>> =20
>>>> wrote:<BR>>HI Lamont,<BR>>Sorry to here your having=20
>>>> =3D<BR>>trouble.<BR>>What=3D20<BR>> exact model =
>>>> of the=20
>>>> Gigabyte board do you mean. The description=3D20<BR>> =20
>>>> you<BR><BR>>have here is vague. Is it a K8NS=20
>>>> Ultra=3D20<BR>> -939?<BR>><BR>>When you say =
>>>> you=20
>>>> rebuilt do you mean you =3D<BR>>reinstalled=3D20<BR>> =
>>>> windows from=20
>>>> scratch?<BR>><BR>><BR>>LaMont=20
>>>> wrote:<BR>>> =3D<BR>>Hi=3D20<BR>> =
>>>> gang:<BR>>>=20
>>>> I 'm having problems getting Paris to ip and =3D<BR>>running.=20
>>>> Paris=3D20<BR>> will sometimes<BR>>> star, only =
>>>> to just=20
>>>> freeze up and crash the =3D<BR>>whole=3D20<BR>> system. =
>>>> So, I=20
>>>> thought<BR>my<BR>>> Asus-Amd XP combo(with=20
>>>> =3D<BR>>SATA-Firwire)=3D20<BR>> was cause too much IRQ =
>>>> problems=20
>>>> for<BR>>> PAris.<BR>>>=3D20<BR>> =20
>>>> <BR>>> So, I rebuilt with my favorite stable=20
>>>> =3D<BR>>mobo(Gigabyte).<BR>>>=3D20<BR>> =
>>>> <BR>>>=20
>>>> Here's the skinny: I just build a new Paris/Nuendo PC. =
>>>> =3D<BR>>Great=20
>>>> very=3D20<BR>> very<BR>fast:<BR>>> Here are =
>>>> the=20
>>>> configs:<BR>>> =
>>>> =3D<BR>><BR>>>=3D20<BR>> =20
>>>> -gigabyte mobo 939 Ultra250<BR>>> -Dual core opteron=20
>>>> =3D<BR>>165<BR>>>=3D20<BR>> -2gig =
>>>> ddr400<BR>>>=20
>>>> -sata (onboard) 3 300 gig drives<BR>>> =3D<BR>>-(1)=20
>>>> RME=3D20<BR>> Digi 96 <BR>>> -(1)Magma card (4 =
>>>> card EDS)=20
>>>> <BR>>> -Matrox=3D20<BR>> g450<BR>>>=20
>>>> <BR>>> Well, Nuendo runs like a Deer!!! WOW.. =
>>>> =3D<BR>>But=20
>>>> PAris=3D20<BR>> is hit and miss. I =
>>>> disabled:<BR>>> USB,=20
>>>> SATA raid..A little =3D<BR>>better, but=3D20<BR>> I', =
>>>> starting to=20
>>>> think that My either<BR>>> my EdS cards or =
>>>> =3D<BR>>Mec/442=20
>>>> are=3D20<BR>> the problem. Just 2 weeks prior, the=20
>>>> system<BR>was<BR>>> working =
>>>> =3D<BR>>fine.=3D20<BR>> =20
>>>> <BR>>> <BR>>> Note: In my studio I have a =
>>>> master power=20
>>>> =3D<BR>>switch that=3D20<BR>> start up the =
>>>> FUrman<BR>>>=20
>>>> power unit..The Magama and Mec units =3D<BR>>were =
>>>> on=3D20<BR>> when I=20
>>>> started up the system.<BR>>> Maybe PAris got a Jolt ??? I=20
>>>> =3D<BR>>don;t=3D20<BR>> know..<BR>>> Please=20
>>>> help..Thanks<BR>>>=3D20<BR>> =20
>>>> =
>>>> <BR>><BR>><BR>><BR>><BR>>Chr=
>>>> is<BR>><BR>>--=20
>>>> =3D<BR>><BR>>Chris=3D20<BR>> =20
>>>> Ludwig<BR>><BR>>ADK Pro=20
>>>> Audio<BR>>(859)=3D20<BR>> =20
>>>> =
>>>> =3D<BR>>635-5762<BR>>www.adkproaudio.com<BR>>chrisl@=
>>>> adkproaudio.com<BR></BL=3D<BR>>OCKQUOTE></BODY></=
>>>> HTML><BR>><BR>><BR></BLOCKQUOTE></BODY></HTML>
>>>>
>>>>
>> --
>> Chris Ludwig
>> ADK
>> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>> www.adkproaudio.com <http://www.adkproaudio.com/>
>> (859) 635-5762
>
>
--
Chris Ludwig
ADK Pro Audio
(859) 635-5762
www.adkproaudio.
|
|
|
|
| Re: Mixing with PARIS outside the box (auxes for stem mixes) [message #63786 is a reply to message #63774] |
Wed, 25 January 2006 15:21 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
;>> =3D
>>>>>> latency=3D20
>>>>>> issues and download an app to look<BR>and change soem of the PCI
=
>>>>> =3D
>>>>>> latency=3D20
>>>>>> settings. <BR><BR>The Sata controller had a setting of 0(zero). EDS
>>>> =
>>>>
>>>>> =3D
>>>>>> scherzo=3D20
>>>>>> (32) matrox (64)..IDE<BR>controller (0)..<BR><BR>Thanks for your
=
>>>>> help=3D20
>>>>>> ..LaMont<BR><BR><BR><BR> Ahris Ludwig <<A=3D20
>>>>>> =
>>>> href=3D3D"mailto:chrisl@adkproaudio.com">chrisl@adkproaudio.com</A>>=3D20=
>>>>>> wrote:<BR>>HI Lamont,<BR>>Sorry to here your having =3D
>>>>>> trouble.<BR>>What=3D20
>>>>>> exact model of the Gigabyte board do you mean. The description=3D20
>>>>>> you<BR><BR>>have here is vague. Is it a K8NS Ultra=3D20
>>>>>> -939?<BR>><BR>>When you say you rebuilt do you mean you =3D
>>>>>> reinstalled=3D20
>>>>>> windows from scratch?<BR>><BR>><BR>>LaMont wrote:<BR>>> =3D
>>>>>> Hi=3D20
>>>>>> gang:<BR>>> I 'm having problems getting Paris to ip and =3D
>>>>>> running. Paris=3D20
>>>>>> will sometimes<BR>>> star, only to just freeze up and crash the =3D
>>>>>> whole=3D20
>>>>>> system. So, I thought<BR>my<BR>>> Asus-Amd XP combo(with =3D
>>>>>> SATA-Firwire)=3D20
>>>>>> was cause too much IRQ problems for<BR>>> PAris.<BR>>>=3D20
>>>>>> <BR>>> So, I rebuilt with my favorite stable =3D
>>>>>> mobo(Gigabyte).<BR>>>=3D20
>>>>>> <BR>>> Here's the skinny: I just build a new Paris/Nuendo PC. =3D
>>>>>> Great very=3D20
>>>>>> very<BR>fast:<BR>>> Here are the configs:<BR>>> =3D
>>>>>> <BR>>>=3D20
>>>>>> -gigabyte mobo 939 Ultra250<BR>>> -Dual core opteron =3D
>>>>>> 165<BR>>>=3D20
>>>>>> -2gig ddr400<BR>>> -sata (onboard) 3 300 gig drives<BR>>> =3D
>>>>>> -(1) RME=3D20
>>>>>> Digi 96 <BR>>> -(1)Magma card (4 card EDS) <BR>>> -Matrox=3D20
>>>>>> g450<BR>>> <BR>>> Well, Nuendo runs like a Deer!!! WOW.. =3D
>>>>>> But PAris=3D20
>>>>>> is hit and miss. I disabled:<BR>>> USB, SATA raid..A little =3D
>>>>>> better, but=3D20
>>>>>> I', starting to think that My either<BR>>> my EdS cards or =3D
>>>>>> Mec/442 are=3D20
>>>>>> the problem. Just 2 weeks prior, the system<BR>was<BR>>> working
=
>>>>> =3D
>>>>>> fine.=3D20
>>>>>> <BR>>> <BR>>> Note: In my studio I have a master power =3D
>>>>>> switch that=3D20
>>>>>> start up the FUrman<BR>>> power unit..The Magama and Mec units =3D
>>>>>> were on=3D20
>>>>>> when I started up the system.<BR>>> Maybe PAris got a Jolt ??? I
=
>>>>> =3D
>>>>>> don;t=3D20
>>>>>> know..<BR>>> Please help..Thanks<BR>>>=3D20
>>>>>> <BR>><BR>><BR>><BR>><BR>>Chris<BR>><BR>>-- =3D
>>>>>> <BR>>Chris=3D20
>>>>>> Ludwig<BR>><BR>>ADK Pro Audio<BR>>(859)=3D20
>>>>>> =3D
>>>>> =
>>>>>
>>>>>> 635-5762<BR>>www.adkproaudio.com<BR>>chrisl@adkproaudio.com<BR></BL=3D
>>>>>> OCKQUOTE></BODY></HTML>
>>>>>>
>>>>>>
>>>>>
>>>>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>>>> <HTML><HEAD>
>>>>> <META http-equiv=3DContent-Type content=3D"text/html; =
>>>>> charset=3Diso-8859-1">
>>>>> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>>>>> <STYLE></STYLE>
>>>>> </HEAD>
>>>>> <BODY bgColor=3D#ffffff>
>>>>> <DIV><FONT face=3DArial size=3D2>LM,</FONT></DIV>
>>>>> <DIV><FONT face=3DArial size=3D2>Can't wait to hear.</FONT></DIV>
>>>>> <DIV><FONT face=3DArial size=3D2>T.</FONT></DIV>
>>>>> <BLOCKQUOTE=20
>>>>> style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>>>> BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>>>> <DIV>"LaMont" <<A=20
>>>>> href=3D"mailto:jjdpro@ameritech.net">jjdpro@ameritech.net</A>> =
>>>>> wrote in=20
>>>>> message <A =
>>>>> href=3D"news:44052522@linux">news:44052522@linux</A>...</DIV><BR>HEY=20
>>>>> Tom,<BR>I'm in the Prcess of moving th magma card to differnt =
>>>>> slots..I'll let=20
>>>>> you<BR>know what happens..<BR><BR>"Tom Bruhl" <<A=20
>>>>> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
>>>>> wrote:<BR>><BR>><BR>>LaMont,<BR>>EDS1 with Matrox is a bad =
>>>>>
>>>>> thing. I'd try different slots within<BR>>the Magma to =
>>>>> correct=20
>>>>> that. Have you tried any other slots on<BR>>the mobo for the =
>>>>> Magma=20
>>>>> card? That might be the first thing unless<BR>>you know that =
>>>>> won't=20
>>>>> help.<BR>>Tom<BR>> "LaMont" <<A=20
>>>>> href=3D"mailto:jjdpro@ameritech.net">jjdpro@ameritech.net</A>> =
>>>>> wrote in=20
>>>>> message =3D<BR>>news:4404e5bf$1@linux...<BR>><BR>> Hi=20
>>>>> Chris,<BR>> Fresh install of win Xp/sp1. New drives, new =
>>>>> everything.=20
>>>>> I'm using =3D<BR>>Apci,<BR>> not Standard PC. Mother Board =
>>>>>
>>>>> GA-K8NSC-939<B
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
